Alle Produkte
-
KallistaIch habe noch nie einen so ausgezeichneten Kundenservice bei einem ausländischen Lieferanten erlebt.Dieses Unternehmen hat weit und breit gegangen, um den Bedürfnissen seiner Kunden gerecht zu werden.Ihre Reaktionszeit mit all meinen Bedenken wurde sofort 100%innerhalb von 1-24 Stunden und die Versandzeit war EXZELLENT!
BAKTH-654060-2S-DC, 7.4V 1950mAh 14.43Wh
| Herkunftsort | China |
|---|---|
| Markenname | BAKTH |
| Zertifizierung | UN38.3 |
| Modellnummer | BAKTH-654060-2S-DC |
| Min Bestellmenge | 2Stk |
| Preis | US$10.9 |
| Verpackung Informationen | Karton |
| Lieferzeit | 15 ~ 20 Tage |
| Zahlungsbedingungen | T/T |
| Versorgungsmaterial-Fähigkeit | 100.000 Stück/Monat |
Produktdetails
| Stromspannung | 7,4 V | Entlastungstemperatur | 0°C bis 45°C |
|---|---|---|---|
| Ladestrom | 0,5 °C | Stapffrei | Ja |
| Arbeitstemperatur | 0℃ ~45℃ | Kapazität | 1950mah |
| Hervorheben | 7.4V Li Polymer battery pack,1950mAh rechargeable battery,14.43Wh Li Polymer battery |
||
Produkt-Beschreibung
Product Overview:
BAKTH-654060-2S-DC is a 7.4V, 1950mAh, 14.43Wh lithium-polymer battery pack constructed in a 2S (two-cell series) configuration, delivering doubled voltage for applications requiring higher power output while maintaining compact size.
Description:
| Description | |
| Model NO. | BAKTH-654060-2S-DC |
| Brand Name | BAKTH / Neutral / OEM |
| Compliant certification standards | UN38.3 / RoHS compliant |
| Discharging temperature | 0℃~40℃ |
| Voltage | 7.4V |
| Cycles Life | 300+ |
2. Physical & Safety Features
- Prismatic Pouch Design: Built in a slim, rectangular polymer pouch with approximate dimensions of 6.5 × 40 × 60 mm, optimized for integration into compact, high-performance devices such as portable Bluetooth speakers, mini drones, handheld gaming controllers, and professional-grade voice recorders.
- Lightweight Construction: Weighs approximately ~68g, offering a favorable power-to-weight ratio for portable electronics requiring elevated voltage without bulk.
- Flame-Retardant Enclosure: Utilizes UL-94V0-rated polymer casing to suppress thermal propagation and meet international safety standards for consumer electronics.
- Integrated Protection Circuit Module (PCM): Equipped with advanced multi-layer safeguards including:
- Overcharge protection (cut-off at 8.45V ±0.05V, i.e., 4.225V per cell)
- Over-discharge protection (triggered below 6.0V, i.e., 3.0V per cell)
- Short-circuit detection (<1ms response time)
- Overcurrent limit (supports up to 1C continuous discharge = 1.95A)
- Thermal shutdown at 60°C (discharge) and 45°C (charge) per cell
- 2S Series Configuration: Two 3.7V, 1950mAh cells connected in series to deliver 7.4V nominal voltage, enabling direct compatibility with 7.4V-rated systems without external boost converters.
- DC Terminal Design: “DC” indicates a 2-pin direct solder pad or JST-XH-style DC connector, facilitating secure, low-resistance connections ideal for OEM integration in fixed-mount or semi-permanent applications.
3. Charging & Maintenance Guidelines
-
- Recommended Charging Method: Use a dedicated 2S Li-Po CC/CV charger set to 8.4V ±0.05V (4.2V per cell). Optimal charge current: 0.5C (975mA) for maximum cycle life; maximum allowable charge current: 1C (1.95A) for fast charging.
- Balancing Requirement: Critical — must be charged using a balanced charger to ensure both cells remain within ±0.05V of each other. Unbalanced charging risks overcharging one cell, leading to swelling or failure.
- Charging Environment: Charge only in dry, ventilated areas within 0°C to 45°C. Avoid charging on flammable surfaces or in enclosed spaces.
- Discharge Management: Never discharge below 6.0V (3.0V per cell). Devices must include low-voltage cutoff to prevent irreversible cell damage.
- Storage Protocol:
- For short-term (<1 month): Store at 40–80% SoC (6.8–7.8V).
- For long-term (>1 month): Store at ~50% SoC (7.4V) in a cool, dry location (15–25°C).
- Recharge every 3 months if unused to prevent deep discharge and cell degradation.
- Handling Precautions: Avoid exposure to water, metal contact, or mechanical stress. Do not attempt to disassemble, solder directly to cell tabs, or modify the PCM.
Empfohlene Produkte
