모든 제품
-
칼리스타저는 단호하게 말씀드리겠습니다. 저는 해외 공급업체와 함께 이렇게 훌륭한 고객 서비스를 경험한 적이 없습니다.이 회사는 고객들의 요구를 충족시키기 위해 더 멀리 갔습니다.제 모든 걱정에 대한 응답시간은 즉시 100% 1-24시간 이내에 해결되었고 배송시간은 훌륭했습니다!
BAKTH-455668-1S-3M, 3.7V, 2000mAh, 7.4Wh
| 원래 장소 | 중국 |
|---|---|
| 브랜드 이름 | BAKTH |
| 인증 | UN38.3 |
| 모델 번호 | BAKTH-455668-1S-3M |
| 최소 주문 수량 | 2개 |
| 가격 | US$3.25 |
| 포장 세부 사항 | 판지 상자 |
| 배달 시간 | 15 ~ 20 일 |
| 지불 조건 | 티/티 |
| 공급 능력 | 100000pcs/월 |
제품 상세 정보
| 전압 | 3.7V | 방출 온도 | 0C~45C |
|---|---|---|---|
| 충전 전류 | 0.5C | 청구 가능 | 예 |
| 작동 온도 | 0℃ ~45℃ | 용량 | 2000mAh |
| 무게 | 대략 40g | 컷오프 전압 | 2.8V |
| 차원 | 약 5.0*56*71mm | ||
| 강조하다 | 3.7V Li Polymer battery pack,2000mAh Li Polymer battery,7.4Wh rechargeable battery pack |
||
제품 설명
Product Overview:
BAKTH-455668-1S-3M is a 3.7V, 2000mAh, 7.4Wh lithium-polymer battery pack engineered for mid-power portable electronics requiring a balance of compact size, reliable output, and extended runtime.
Description:
| Weight | 40 g |
| Dimensions | 5 × 56 × 71 mm |
| Type | Li-Po |
| Power Capability | 2400 mAh |
| Power Capacity | 7Wh |
| Voltage | 3.7V |
| Max. charging voltage | 4.2V |
| Cut-off voltage | 2.8V |
| Cycles Life | 300+ |
2. Physical & Safety Features
- Prismatic Pouch Design: Constructed in a slim, rectangular polymer pouch with approximate dimensions of 4.5 × 56 × 68 mm, optimized for integration into space-limited devices such as smart pens, compact voice recorders, Bluetooth headsets, and wearable health trackers.
- Lightweight Construction: Weighs approximately ~45g, enabling ergonomic use in handheld and wearable applications without adding significant bulk.
- Flame-Retardant Enclosure: Uses UL-94V0-rated polymer casing to resist ignition and limit thermal spread under abnormal conditions.
- Integrated Protection Circuit Module (PCM): Features comprehensive safety controls including:
- Overcharge protection (cut-off at 4.25V ±0.05V)
- Over-discharge protection (triggered below 3.0V)
- Short-circuit detection (<1ms response)
- Overcurrent limit (supports up to 1C continuous discharge = 2.0A)
- Thermal shutdown at 60°C (discharge) and 45°C (charge)
- Single-Series Configuration (1S): Maintains standard 3.7V nominal voltage for seamless compatibility with most low-to-mid power Li-ion systems.
- 3M Terminal Design: Indicates a 3-pin micro-connector interface (typically V+, V−, and NTC thermistor), enabling smart charging, temperature monitoring, and secure plug-and-play integration in OEM devices.
3. Charging & Maintenance Guidelines
-
-
- Recommended Charging Method: Use a CC/CV (constant current/constant voltage) charger set to 4.2V ±0.05V. Optimal charge current: 0.5C (1.0A) for maximum cycle life; maximum allowable charge current: 1C (2.0A) for faster top-up.
- Charging Environment: Charge only in dry, ventilated areas within 0°C to 45°C. Avoid charging in direct sunlight, near heat sources, or in humid environments.
- Discharge Management: Never discharge below 3.0V to prevent cell degradation and loss of capacity. Devices should include low-voltage cutoff circuitry.
- Storage Protocol:
- For short-term (<1 month): Store at 40–80% SoC.
- For long-term (>1 month): Store at ~50% SoC (3.7–3.8V) in a cool, dry location (15–25°C).
- Recharge every 3 months if unused to maintain cell health and prevent deep discharge.
- Handling Precautions: Avoid exposure to water, metal objects, or mechanical stress. Do not attempt to disassemble, solder directly to cells, or modify terminals.
- End-of-Life Disposal: Recycle through certified lithium-ion battery recycling programs. Never incinerate or discard in regular trash due to fire and environmental hazards.
추천된 제품
