• Shenzhen BAK Technology Co., Ltd.
    کالیستا
    من می خواهم این را شیرین و کوتاه نگه دارم! من هرگز چنین خدمات مشتری عالی را با یک تامین کننده خارج از کشور تجربه نکرده ام. این شرکت برای پاسخگویی به نیازهای مشتریان خود فراتر رفته است. زمان پاسخگویی آنها به تمام نگرانی های من بلافاصله 100٪ در عرض 1 تا 24 ساعت رسیدگی شد و زمان حمل و نقل عالی بود!
تماس با شخص : Dong
شماره تلفن : +86 13828713564
واتساپ : +8613828713564

BAKTH-455668-1S-3M, 3.7V, 2000mAh, 7.4Wh

محل منبع چین
نام تجاری BAKTH
گواهی UN38.3
شماره مدل BAKTH-455668-1S-3M
مقدار حداقل تعداد سفارش 2 عدد
قیمت US$3.25
جزئیات بسته بندی کارتن
زمان تحویل 20 روز 15
شرایط پرداخت T/T
قابلیت ارائه 100000 عدد در ماه
جزئیات محصول
ولتاژ 3.7 ولت دمای تخلیه 0℃~45℃
جریان شارژ 0.5 درجه سانتیگراد قابل شارژ بله
دمای کاری 0 ℃ 45 ℃ ظرفیت 2000 میلی آمپر ساعت
وزن تقریبا 40 گرم ولتاژ قطع 2.8 ولت
بعد تقریباً 5.0 * 56 * 71 میلی متر
برجسته کردن

3.7V Li Polymer battery pack,2000mAh Li Polymer battery,7.4Wh rechargeable battery pack

,

2000mAh Li Polymer battery

,

7.4Wh rechargeable battery pack

پیام بگذارید
توضیحات محصول
Product Overview:
BAKTH-455668-1S-3M‌ is a ‌3.7V, 2000mAh, 7.4Wh lithium-polymer battery pack‌ engineered for mid-power portable electronics requiring a balance of compact size, reliable output, and extended runtime.

Description:
Weight 40 g
Dimensions 5 × 56 × 71 mm
Type Li-Po
Power   Capability 2400 mAh
Power   Capacity 7Wh
Voltage 3.7V
Max.   charging voltage 4.2V
Cut-off   voltage 2.8V
Cycles   Life 300+

 

2. Physical & Safety Features‌‌

  • Prismatic Pouch Design‌: Constructed in a slim, rectangular polymer pouch with approximate dimensions of ‌4.5 × 56 × 68 mm‌, optimized for integration into space-limited devices such as ‌smart pens, compact voice recorders, Bluetooth headsets, and wearable health trackers‌.
  • Lightweight Construction‌: Weighs approximately ‌~45g‌, enabling ergonomic use in handheld and wearable applications without adding significant bulk.
  • Flame-Retardant Enclosure‌: Uses ‌UL-94V0-rated polymer casing‌ to resist ignition and limit thermal spread under abnormal conditions.
  • Integrated Protection Circuit Module (PCM)‌: Features comprehensive safety controls including:
    • Overcharge protection (cut-off at ‌4.25V ±0.05V‌)
    • Over-discharge protection (triggered below ‌3.0V‌)
    • Short-circuit detection (<1ms response)
    • Overcurrent limit (supports up to ‌1C continuous discharge = 2.0A‌)
    • Thermal shutdown at ‌60°C (discharge)‌ and ‌45°C (charge)
  • Single-Series Configuration (1S)‌: Maintains standard 3.7V nominal voltage for seamless compatibility with most low-to-mid power Li-ion systems.
  • 3M Terminal Design‌: Indicates a ‌3-pin micro-connector interface‌ (typically V+, V−, and NTC thermistor), enabling smart charging, temperature monitoring, and secure plug-and-play integration in OEM devices.

3. Charging & Maintenance Guidelines

  • Recommended Charging Method‌: Use a ‌CC/CV (constant current/constant voltage)‌ charger set to ‌4.2V ±0.05V‌. Optimal charge current: ‌0.5C (1.0A)‌ for maximum cycle life; maximum allowable charge current: ‌1C (2.0A)‌ for faster top-up.
  • Charging Environment‌: Charge only in ‌dry, ventilated areas‌ within ‌0°C to 45°C‌. Avoid charging in direct sunlight, near heat sources, or in humid environments.
  • Discharge Management‌: Never discharge below ‌3.0V‌ to prevent cell degradation and loss of capacity. Devices should include low-voltage cutoff circuitry.
  • Storage Protocol‌:
    • For short-term (<1 month): Store at ‌40–80% SoC‌.
    • For long-term (>1 month): Store at ‌~50% SoC (3.7–3.8V)‌ in a cool, dry location (‌15–25°C‌).
    • Recharge every ‌3 months‌ if unused to maintain cell health and prevent deep discharge.
  • Handling Precautions‌: Avoid exposure to water, metal objects, or mechanical stress. Do not attempt to disassemble, solder directly to cells, or modify terminals.
  • End-of-Life Disposal‌: Recycle through certified lithium-ion battery recycling programs. ‌Never incinerate or discard in regular trash‌ due to fire and environmental hazards.