Todos los productos
-
Paquete de la batería de ión de litio
-
Paquete de batería de polímero de litio
-
Conjunto de baterías LiFePO4
-
Batería de ciclo profundo
-
BMS PCM de los PCB
-
Paquete de baterías personalizado
-
batería de la bici de e
-
Baterías de litio UPS
-
Paquete de baterías de hidruro metálico de níquel
-
Batería recargable de iones de litio
-
Cargador de batería de ión de litio
-
- ¿ Por qué?Nunca he experimentado un servicio al cliente tan excelente con un proveedor de fuera del país.Esta compañía ha ido más allá para satisfacer las necesidades de sus clientes.Su tiempo de respuesta con todas mis preocupaciones fueron abordados inmediatamente 100% dentro de 1-24 horas y el tiempo de envío fue EXCELENTE!
BAKTH-455668-1S-3M, 3.7V, 2000mAh, 7.4Wh
| Lugar de origen | Porcelana |
|---|---|
| Nombre de la marca | BAKTH |
| Certificación | UN38.3 |
| Número de modelo | BAKTH-455668-1S-3M |
| Cantidad de orden mínima | 2 piezas |
| Precio | US$3.25 |
| Detalles de empaquetado | Caja de cartón |
| Tiempo de entrega | 15 ~ 20 días |
| Condiciones de pago | T/T |
| Capacidad de la fuente | 100000 unidades/mes |
Datos del producto
| Voltaje | 3,7 V | Temperatura de descarga | 0°C a 45°C |
|---|---|---|---|
| Corriente de carga | 0,5ºC | Cobrable | Sí |
| Temperatura de trabajo | 0℃ ~45℃ | Capacidad | 2000mAh |
| peso | 40g aproximado | Voltaje de corte | 2,8 V |
| Dimensión | Aproximadamente 5,0*56*71mm | ||
| Resaltar | 3.7V Li Polymer battery pack,2000mAh Li Polymer battery,7.4Wh rechargeable battery pack |
||
Descripción de producto
Product Overview:
BAKTH-455668-1S-3M is a 3.7V, 2000mAh, 7.4Wh lithium-polymer battery pack engineered for mid-power portable electronics requiring a balance of compact size, reliable output, and extended runtime.
Description:
| Weight | 40 g |
| Dimensions | 5 × 56 × 71 mm |
| Type | Li-Po |
| Power Capability | 2400 mAh |
| Power Capacity | 7Wh |
| Voltage | 3.7V |
| Max. charging voltage | 4.2V |
| Cut-off voltage | 2.8V |
| Cycles Life | 300+ |
2. Physical & Safety Features
- Prismatic Pouch Design: Constructed in a slim, rectangular polymer pouch with approximate dimensions of 4.5 × 56 × 68 mm, optimized for integration into space-limited devices such as smart pens, compact voice recorders, Bluetooth headsets, and wearable health trackers.
- Lightweight Construction: Weighs approximately ~45g, enabling ergonomic use in handheld and wearable applications without adding significant bulk.
- Flame-Retardant Enclosure: Uses UL-94V0-rated polymer casing to resist ignition and limit thermal spread under abnormal conditions.
- Integrated Protection Circuit Module (PCM): Features comprehensive safety controls including:
- Overcharge protection (cut-off at 4.25V ±0.05V)
- Over-discharge protection (triggered below 3.0V)
- Short-circuit detection (<1ms response)
- Overcurrent limit (supports up to 1C continuous discharge = 2.0A)
- Thermal shutdown at 60°C (discharge) and 45°C (charge)
- Single-Series Configuration (1S): Maintains standard 3.7V nominal voltage for seamless compatibility with most low-to-mid power Li-ion systems.
- 3M Terminal Design: Indicates a 3-pin micro-connector interface (typically V+, V−, and NTC thermistor), enabling smart charging, temperature monitoring, and secure plug-and-play integration in OEM devices.
3. Charging & Maintenance Guidelines
-
-
- Recommended Charging Method: Use a CC/CV (constant current/constant voltage) charger set to 4.2V ±0.05V. Optimal charge current: 0.5C (1.0A) for maximum cycle life; maximum allowable charge current: 1C (2.0A) for faster top-up.
- Charging Environment: Charge only in dry, ventilated areas within 0°C to 45°C. Avoid charging in direct sunlight, near heat sources, or in humid environments.
- Discharge Management: Never discharge below 3.0V to prevent cell degradation and loss of capacity. Devices should include low-voltage cutoff circuitry.
- Storage Protocol:
- For short-term (<1 month): Store at 40–80% SoC.
- For long-term (>1 month): Store at ~50% SoC (3.7–3.8V) in a cool, dry location (15–25°C).
- Recharge every 3 months if unused to maintain cell health and prevent deep discharge.
- Handling Precautions: Avoid exposure to water, metal objects, or mechanical stress. Do not attempt to disassemble, solder directly to cells, or modify terminals.
- End-of-Life Disposal: Recycle through certified lithium-ion battery recycling programs. Never incinerate or discard in regular trash due to fire and environmental hazards.
Productos recomendados
