جميع المنتجات
  • Shenzhen BAK Technology Co., Ltd.
    كاليستا
    سأبقي هذا الأمر لطيفًا ومختصرًا! لم يسبق لي أن اختبرت خدمة عملاء ممتازة مثل هذه مع مورد من خارج البلاد. لقد تجاوزت هذه الشركة كل التوقعات لتلبية احتياجات عملائها. تمت معالجة وقت استجابتهم لجميع مخاوفي على الفور بنسبة 100% في غضون 1-24 ساعة، وكان وقت الشحن ممتازًا!
اتصل شخص : Dong
رقم الهاتف : +86 13828713564
واتساب : +8613828713564

OEM Customization 5S 18V Li-ion BMS Protection Board for Industrial Equipment

  • OEM Customization 5S 18V Li-ion BMS Protection Board for Industrial Equipment
  • OEM Customization 5S 18V Li-ion BMS Protection Board for Industrial Equipment
  • OEM Customization 5S 18V Li-ion BMS Protection Board for Industrial Equipment
  • OEM Customization 5S 18V Li-ion BMS Protection Board for Industrial Equipment
  • OEM Customization 5S 18V Li-ion BMS Protection Board for Industrial Equipment
  • OEM Customization 5S 18V Li-ion BMS Protection Board for Industrial Equipment
مكان المنشأ Dongguan الصين
اسم العلامة التجارية BAKTH / Neutral / OEM
إصدار الشهادات IEC62133
رقم الموديل BAKTH-005S010A-0138-01
الحد الأدنى لكمية 2 قطعة
الأسعار USD 21.84~25.2 /PC
تفاصيل التغليف كرتون الورق الصناعي
وقت التسليم 3-4 أسابيع
شروط الدفع ر/ر
القدرة على العرض 10000pcs/شهر

اتصل بي للحصول على عينات مجانية وكوبونات

واتساب:0086 18588475571

(ويتشات): 0086 18588475571

سكايب: sales10@aixton.com

إذا كان لديك أي مخاوف، نحن نقدم المساعدة على الانترنت على مدار 24 ساعة.

x
تفاصيل المنتج
يكتب 5s لوحة حماية بطارية الليثيوم نوع البطارية ليثيوم أيون
جهد الكشف عن الشحنة (الخلية) 3.750V ± 0.025V فوق جهد الكشف عن التفريغ (الخلية) 2.200V ± 0.050V
على التفريغ الحالي 15 أ-25 أ على الشحن الحالي 3A-5A
درجة حرارة التفريغ -25 ℃ ~ 65 ℃ قابل للتعديل درجة حرارة الشحن -5 ℃ ~ 55 ℃ قابل للتعديل
البعد 125*70*8 مم ماكس 5A
عينة متاح
اترك رسالة
منتوج وصف

 

OEM Customization 5S 18V Li-ion BMS Protection Board for Industrial Equipment


  • The BAKTH-005S010A-0138-01 is a model-specific 5S lithium battery protection board, engineered to safeguard 5-cell series (5S) lithium battery packs—with tailored safety and performance optimization. Designed for mid-to-high voltage applications, this board acts as a critical safeguard against battery damage and safety hazards, while its “010A” designation indicates a 10A continuous current rating, making it ideal for power-demanding devices like electric tools, portable energy storage units, and light mobility gear.
  • ​
    5S-Specific Protection & Precision​
    Optimized for 5S battery configurations, the BAKTH-005S010A-0138-01 delivers calibrated safeguards for 5 individual cells:​
    • Overcharge Protection: Triggers when any cell exceeds 3.75V (Li-ion), cutting off charging current to prevent cell swelling, electrolyte breakdown, or thermal runaway—critical for 5S packs where voltage accumulation amplifies overcharge risks.​
    • Undervoltage Protection: Shuts down discharge if a cell drops below 2.2V (Li-ion), avoiding irreversible capacity loss that often plagues multi-cell packs due to “weak cell” drag. ​
    • Overcurrent & Short-Circuit Protection: Instantly blocks currents exceeding 10A (continuous), shielding the 5S pack and connected devices from burnout during high-load operation (e.g., electric drill startups) or accidental short circuits.​
    • 5-Cell Balancing: Automatically equalizes voltage across all 5 cells during charging, eliminating uneven charge distribution and ensuring each cell operates at peak efficiency—extending the 5S pack’s overall lifespan by up to 30% compared to unbalanced systems.
    • ​
    Technical Advantages for Reliability​
    Equipped with high-precision voltage detection chips (±2mV accuracy), the board monitors each cell’s status in real time, ensuring timely and consistent protection responses. Its ultra-low static current (<10μA) minimizes idle power drain, keeping the 5S pack ready for use during storage. The board also features auto-recovery: once fault conditions are resolved, it resumes normal operation without manual reset, enhancing user convenience for industrial or daily-use devices.

About Us

Shenzhen BAKTH Technology Co., Ltd. was established in 2002. For 21 years, we've specialized in battery pack assembly and PCM/BMS design and production. Our 5,000-square-meter factory features automated production lines and SMT assembly capabilities.

OEM Customization 5S 18V Li-ion BMS Protection Board for Industrial Equipment 0

Certifications
OEM Customization 5S 18V Li-ion BMS Protection Board for Industrial Equipment 1
FAQ
What kind of certificate your battery pack owned?

ISO9001, ISO14001, UL, BIS, KC, USTC, CE, CB - our battery packs have reliable quality assurance.

Do you have MOQ?

No limitation - we offer competitive pricing based on order quantity. Sample orders are welcome to test our quality before bulk orders.

What's the warranty? How can we guarantee quality?

Standard warranty is 12 months (negotiable for special products). Our complete production process ensures quality before shipment.

What's the lead time?

Standard products: 3-4 weeks for samples (depending on cell availability), 5-8 weeks for bulk orders (varies by model and quantity).

Can we have our own Logo on the battery pack? Can you accept customized battery?

Yes - our professional R&D team can provide customized solutions according to your requirements.

بطاقة:

بطارية الليثيوم خدمات إدارة المباني,بطارية بي سي ام لايف بو 4,ثنائي الفينيل متعدد الكلور حلبة المجلس الجمعية

pcm lifepo4 battery

PCB Circuit Board Assembly

المنتجات الموصى بها