Tất cả sản phẩm
  • Shenzhen BAK Technology Co., Ltd.
    Kallista
    Tôi sẽ tóm tắt ngắn gọn thôi! Tôi chưa từng trải nghiệm dịch vụ khách hàng tuyệt vời đến vậy từ một nhà cung cấp nước ngoài. Công ty này đã vượt xa để đáp ứng nhu cầu của khách hàng. Thời gian phản hồi của họ với tất cả các vấn đề của tôi đều được giải quyết ngay lập tức 100% trong vòng 1-24 giờ và thời gian vận chuyển là TUYỆT VỜI!
Người liên hệ : Dong
Số điện thoại : +86 13828713564
WhatsApp : +8613828713564

OEM Customization 5S 18V Li-ion BMS Protection Board for Industrial Equipment

  • OEM Customization 5S 18V Li-ion BMS Protection Board for Industrial Equipment
  • OEM Customization 5S 18V Li-ion BMS Protection Board for Industrial Equipment
  • OEM Customization 5S 18V Li-ion BMS Protection Board for Industrial Equipment
  • OEM Customization 5S 18V Li-ion BMS Protection Board for Industrial Equipment
  • OEM Customization 5S 18V Li-ion BMS Protection Board for Industrial Equipment
  • OEM Customization 5S 18V Li-ion BMS Protection Board for Industrial Equipment
Nguồn gốc Dongguan Trung Quốc
Hàng hiệu BAKTH / Neutral / OEM
Chứng nhận IEC62133
Số mô hình BAKTH-005S010A-0138-01
Số lượng đặt hàng tối thiểu 2 mảnh
Giá bán USD 21.84~25.2 /PC
chi tiết đóng gói Giấy công nghiệp carton
Thời gian giao hàng 3-4 tuần
Điều khoản thanh toán T/t
Khả năng cung cấp 10000pc/tháng

Liên hệ với tôi để lấy mẫu miễn phí và phiếu giảm giá.

WhatsApp:0086 18588475571

WeChat: 0086 18588475571

Skype: sales10@aixton.com

Nếu bạn có bất kỳ mối quan tâm nào, chúng tôi cung cấp hỗ trợ trực tuyến 24 giờ.

x
Thông tin chi tiết sản phẩm
Kiểu 5s Bảng bảo vệ pin lithium Loại pin Li-Ion
Điện áp phát hiện điện tích quá điện (ô) 3,750V ± 0,025V Điện áp phát hiện quá mức (ô) 2.200V ± 0,050V
Trên sự xuất viện hiện tại 15A-25A Qua phí hiện tại 3A-5A
Nhiệt độ xả -25 ℃ ~ 65 có thể điều chỉnh Nhiệt độ sạc -5 ℃ ~ 55 có thể điều chỉnh
Kích thước 125*70*8 mm Dòng xả tối đa 5A
Vật mẫu Có sẵn
Để lại lời nhắn
Mô tả sản phẩm

 

OEM Customization 5S 18V Li-ion BMS Protection Board for Industrial Equipment


  • The BAKTH-005S010A-0138-01 is a model-specific 5S lithium battery protection board, engineered to safeguard 5-cell series (5S) lithium battery packs—with tailored safety and performance optimization. Designed for mid-to-high voltage applications, this board acts as a critical safeguard against battery damage and safety hazards, while its “010A” designation indicates a 10A continuous current rating, making it ideal for power-demanding devices like electric tools, portable energy storage units, and light mobility gear.
  • ​
    5S-Specific Protection & Precision​
    Optimized for 5S battery configurations, the BAKTH-005S010A-0138-01 delivers calibrated safeguards for 5 individual cells:​
    • Overcharge Protection: Triggers when any cell exceeds 3.75V (Li-ion), cutting off charging current to prevent cell swelling, electrolyte breakdown, or thermal runaway—critical for 5S packs where voltage accumulation amplifies overcharge risks.​
    • Undervoltage Protection: Shuts down discharge if a cell drops below 2.2V (Li-ion), avoiding irreversible capacity loss that often plagues multi-cell packs due to “weak cell” drag. ​
    • Overcurrent & Short-Circuit Protection: Instantly blocks currents exceeding 10A (continuous), shielding the 5S pack and connected devices from burnout during high-load operation (e.g., electric drill startups) or accidental short circuits.​
    • 5-Cell Balancing: Automatically equalizes voltage across all 5 cells during charging, eliminating uneven charge distribution and ensuring each cell operates at peak efficiency—extending the 5S pack’s overall lifespan by up to 30% compared to unbalanced systems.
    • ​
    Technical Advantages for Reliability​
    Equipped with high-precision voltage detection chips (±2mV accuracy), the board monitors each cell’s status in real time, ensuring timely and consistent protection responses. Its ultra-low static current (<10μA) minimizes idle power drain, keeping the 5S pack ready for use during storage. The board also features auto-recovery: once fault conditions are resolved, it resumes normal operation without manual reset, enhancing user convenience for industrial or daily-use devices.

About Us

Shenzhen BAKTH Technology Co., Ltd. was established in 2002. For 21 years, we've specialized in battery pack assembly and PCM/BMS design and production. Our 5,000-square-meter factory features automated production lines and SMT assembly capabilities.

OEM Customization 5S 18V Li-ion BMS Protection Board for Industrial Equipment 0

Certifications
OEM Customization 5S 18V Li-ion BMS Protection Board for Industrial Equipment 1
FAQ
What kind of certificate your battery pack owned?

ISO9001, ISO14001, UL, BIS, KC, USTC, CE, CB - our battery packs have reliable quality assurance.

Do you have MOQ?

No limitation - we offer competitive pricing based on order quantity. Sample orders are welcome to test our quality before bulk orders.

What's the warranty? How can we guarantee quality?

Standard warranty is 12 months (negotiable for special products). Our complete production process ensures quality before shipment.

What's the lead time?

Standard products: 3-4 weeks for samples (depending on cell availability), 5-8 weeks for bulk orders (varies by model and quantity).

Can we have our own Logo on the battery pack? Can you accept customized battery?

Yes - our professional R&D team can provide customized solutions according to your requirements.

thẻ:

pin lithium bms

pin pcm lifepo4

Bộ PCB