Alle producten
  • Shenzhen BAK Technology Co., Ltd.
    Kallista
    Ik heb nog nooit zo'n uitstekende klantenservice met een buitenlandse leverancier ervaren.Dit bedrijf is ver gegaan om aan de behoeften van hun klanten te voldoen.Hun reactietijd met al mijn zorgen werd onmiddellijk 100% binnen 1-24 uur en de verzendtijd was EXCELLENT!
Contactpersoon : Dong
Telefoonnummer : +86 13828713564
WatAPP : +8613828713564

BAKTH-LP-102128, 3.7V, 430mAh, 1.59Wh

  • BAKTH-LP-102128, 3.7V, 430mAh, 1.59Wh
  • BAKTH-LP-102128, 3.7V, 430mAh, 1.59Wh
Plaats van herkomst China
Merknaam BAKTH
Certificering UN38.3
Modelnummer BAKTH-102128P
Min. bestelaantal 2 stuks
Prijs US$1.85
Verpakking Details Karton
Levertijd 15 ~ 20 dagen
Betalingscondities T/T
Levering vermogen 3000*2000*300mm
Productdetails
Spanning 3,7V Ontladingstemperatuur -20 ℃ ~ 45 ℃
Laadstroom 0,5C Scheikunde Li-pol
Beschuldigd Ja Werktemperatuur 0℃ ~45℃
Capaciteit 430 mAh
Markeren

3.7V Li Polymer battery pack

,

430mAh rechargeable battery

,

1.59Wh lithium polymer battery
Laat een bericht achter
Productomschrijving
Product Overview:
The ‌BAKTH-LP-102128‌ is a compact ‌3.7V 430mAh (1.59Wh)‌ rechargeable lithium-ion battery, commonly used in ultra-lightweight and space-constrained electronic devices. With a ‌single-cell (1S)‌ configuration, it delivers a nominal voltage typical of small consumer electronics, making it ideal for low-power applications where size and weight are critical.

Description:
Weight 10 g
Dimensions 10 × 22 × 31 mm
Type Li-Po
Power   Capability 430 mAh
Power   Capacity 1Wh
Voltage 3.7V
Max.   charging voltage 4.2V
Cut-off   voltage 2.8V
Cycles   Life 300+

 

Physical and Application Profile

This battery is typically housed in a ‌prismatic or pouch cell‌ design, emphasizing ‌minimal thickness and light weight‌—often under ‌20g‌. It is widely integrated into:

  • ‌Wearable devices‌: smartwatches, fitness trackers, hearables
  • ‌Miniature drones and toy-grade RC models‌
  • ‌Bluetooth accessories‌: earbuds, remotes, mini speakers
  • ‌IoT sensors and medical wearables‌: temperature monitors, patch devices

Its compact form factor requires precise fitment, so users must verify ‌physical dimensions, connector type (e.g., JST-PH 2.0mm), and polarity‌ before replacement or integration.

Charging and Safety Considerations

To ensure safety and longevity:

  • Use a ‌constant current/constant voltage (CC/CV) charger‌ set to ‌3.7V (4.2V full charge)‌
  • Charge at ‌0.5C–1C rate (215mA–430mA)‌ to avoid overheating
  • Store at ‌3.7–3.8V (partial charge)‌ in a cool, dry environment
  • Avoid over-discharge below ‌3.0V‌ to prevent cell damage

The battery may include ‌built-in protection circuits‌ against overcharge and short circuits, but external PCM integration is recommended in custom applications.

Markeringen:

Lipo batterijpakket

li poly oplaadbare batterijpack

Li Polymer Battery Cell