Alle Produkte
-
KallistaIch habe noch nie einen so ausgezeichneten Kundenservice bei einem ausländischen Lieferanten erlebt.Dieses Unternehmen hat weit und breit gegangen, um den Bedürfnissen seiner Kunden gerecht zu werden.Ihre Reaktionszeit mit all meinen Bedenken wurde sofort 100%innerhalb von 1-24 Stunden und die Versandzeit war EXZELLENT!
BAKTH-LP-102128, 3.7V, 430mAh, 1.59Wh
| Herkunftsort | China |
|---|---|
| Markenname | BAKTH |
| Zertifizierung | UN38.3 |
| Modellnummer | BAKTH-102128P |
| Min Bestellmenge | 2Stk |
| Preis | US$1.85 |
| Verpackung Informationen | Karton |
| Lieferzeit | 15 ~ 20 Tage |
| Zahlungsbedingungen | T/T |
| Versorgungsmaterial-Fähigkeit | 100.000 Stück/Monat |
Produktdetails
| Stromspannung | 3,7V | Entlastungstemperatur | -20 ℃ ~ 45 ℃ |
|---|---|---|---|
| Ladestrom | 0,5 °C | Chemie | Li-pol |
| Stapffrei | Ja | Arbeitstemperatur | 0℃ ~45℃ |
| Kapazität | 430mAh | ||
| Hervorheben | 3.7V Li Polymer battery pack,430mAh rechargeable battery,1.59Wh lithium polymer battery |
||
Produkt-Beschreibung
Product Overview:
The BAKTH-LP-102128 is a compact 3.7V 430mAh (1.59Wh) rechargeable lithium-ion battery, commonly used in ultra-lightweight and space-constrained electronic devices. With a single-cell (1S) configuration, it delivers a nominal voltage typical of small consumer electronics, making it ideal for low-power applications where size and weight are critical.
Description:
| Weight | 10 g |
| Dimensions | 10 × 22 × 31 mm |
| Type | Li-Po |
| Power Capability | 430 mAh |
| Power Capacity | 1Wh |
| Voltage | 3.7V |
| Max. charging voltage | 4.2V |
| Cut-off voltage | 2.8V |
| Cycles Life | 300+ |
Physical and Application Profile
This battery is typically housed in a prismatic or pouch cell design, emphasizing minimal thickness and light weight—often under 20g. It is widely integrated into:
- Wearable devices: smartwatches, fitness trackers, hearables
- Miniature drones and toy-grade RC models
- Bluetooth accessories: earbuds, remotes, mini speakers
- IoT sensors and medical wearables: temperature monitors, patch devices
Its compact form factor requires precise fitment, so users must verify physical dimensions, connector type (e.g., JST-PH 2.0mm), and polarity before replacement or integration.
Charging and Safety Considerations
To ensure safety and longevity:
- Use a constant current/constant voltage (CC/CV) charger set to 3.7V (4.2V full charge)
- Charge at 0.5C–1C rate (215mA–430mA) to avoid overheating
- Store at 3.7–3.8V (partial charge) in a cool, dry environment
- Avoid over-discharge below 3.0V to prevent cell damage
The battery may include built-in protection circuits against overcharge and short circuits, but external PCM integration is recommended in custom applications.
Empfohlene Produkte
